QL40-OCEAN
from Mt Sopris

The QL40-OCEAN combines the multi-parameter sensing unit manufactured by Idronaut that enables the probe to be run on a standard logging wireline using standard telemetry schemes. The probe is specially designed for borehole applications.

The standard probe is equipped to measure temperature, pressure, dissolved oxygen, fluid electrical conductivity, pH & Redox. Other optional sensors include ammonia, nitrate, and chloride ion concentration estimates.

Borehole water quality profiling is important in many industries including ground water studies, environmental site assessment, mine dewatering, salt-water intrusion, etc. Data from time-lapse water quality profiling can be entered into regional water study models and used in the prediction for future ground water quality assessments.

QL40-OCEAN water sampling probe schematic. Image courtesy of Mt Sopris Instruments.
QL40-OCEAN water sampling probe schematic. Image courtesy of Mt Sopris Instruments.
Technical specifications of each sensor. Table courtesy of Mt Sopris Instruments.
Technical specifications of each sensor. Table courtesy of Mt Sopris Instruments.

Product Dimensions

Physical Dimensions (L x W x H) Weight
QL40-OCEAN (instrument only) 141cm x 4.2cm x 4.2cm 5.45kg

Technical Specifications

Pressure Rating: 150 bar (2175 psi).
Operating Temperature: 50ºC.
Cable type: Mono, 4 or 7 conductor (for multi conductor only 1 line used).
Digital data transmission: Up to 500 Kbits per second depending on wireline.

Shipping

Contents Dimensions (L x W x H) Weight
Case1
QL40-OCEAN
215cm x 32cm x 16cm 30kg

Data Sheet

Literature